News
How to improve the service life of roller bearings
How to improve the service life of the roller bearing new adjusting roller, including conveyor belts, conveyor belt and roller contact, it has the adjusting roller group and the partial linkage of two parts, the partial joint part is: setting for a vertical roll on both ends of the conveyor belt, vertical roll through the stud connectors respectively connected to the stud, fixed on the vertical bar has a second stud connectors connected to the rail, rail through the precision regulator connected with flat bars, flat bars welded on the adjusting roller group. This new type can solve adjusting effect is poor, complex structure, the problem of high failure rate. A good wear resistance, high impact resistance and low noise of self-aligning roller rim roll group applications. The new guard roller for self-aligning roller group, through technical solutions have to be addressed, including shaft, shaft outer surface and ultra-high molecular polyethylene roll skin surface adjacent within weeks, roll leather upper and lower end circumference of upper and lower grooves were set up, the shaft with the retaining ring through the shaft set within a groove, the shaft with the retaining ring is located in the lateral and set in the slots on the shaft end, axial skin and face the lateral set cap. The new rectifying device for belt conveyor self-aligning roller group, is not only reliable operation also greatly reduces the noise, almost no damage to the conveyor belt edge at the same time, improve the service life of the adhesive tape. How to improve the service life of roller bearings.
